Klubersynth UH1 6-460
is a synthetic high-performance gear oil based on polyglycol satisfying the growing requirements and increasing power density of modern gears. Klubersynth UH1 6 includes KluberComp Lube Technology*, i.e. it is based on especially high-grade raw materials and advanced additives, enabling maximum performance in the lubrication of all gear components.
Klubersynth UH1 6-460 oils are NSF H1 registered and therefore comply with FDA 21 CFR § 178.3570. The lubricants were developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries. The use of Klubersynth UH1 6-460 oils can contribute to increase reliability of your production processes.
Klubersynth UH1 6-460 is approved by Siemens-Flender, Siemens Geared Motors, SEW Eurodrive, Getriebebau Nord, Stöber Antriebstechnik, Lenze, ZAE Antriebssysteme, Baldor, Boston Gear, Bonfiglioli, Watt Drive, etc.
Klubersynth UH1 6-460 oil is used for the lubrication of highly loaded spur, bevel and planetary gears, rolling and plain bearings as well as all types of toothed couplings, especially when exposed to high temperatures. Klubersynth UH1 6-460 oil was especially developed for the lubrication of worm gears with steel/bronze pairings. It can also be used for the lubrication of lifting, drive and transport chains.
Benefits for your application
Viscosity: ISO VG 460
Service Temperature Range: -30° Celsius to 160° Celsius
Registered as NSF H1 and certified according to ISO 21469
corresponding gears can be switched to Klubersynth UH1 6-460 without prior consultation with the gear manufacturer provided the general application notes are observed
Klubersynth UH1 6-460 offers high scuffing load capacity. Gears are sufficiently protected against scuffing even at extremely high peak loads, vibrations or oscillations, or if no running-in was performed
The excellent wear protection of both gears and rolling bearings ensures that the service life calculated for the lubricated components is achieved, leading to lower maintenance and repair costs
offers a much longer service life than mineral oils due to the excellent ageing and oxidation resistance of the selected raw materials
the product's low foaming tendency and anti-corrosive properties enable problem-free gear operation
the excellent viscosity-temperature behavior supports the formation of a sufficient lubricant film across a wide service temperature range, even at elevated and high temperatures. Therefore, a single viscosity grade can cover both low and high temperatures in many applications
the optimized friction behavior enabled by the carefully selected base oils based on polyglycol reduces power loss and improves gear efficiency, especially in worm gears
